Online Catalogue

View Basket | Checkout | Items:, Value:

spacer
spacer

New Products

Club Spec 4S steering wheel auxiliary system

Club Spec 4S steering wheel auxiliary system

Aimed at the Club and Professional Motorsport Racer, and everyday car user, a system designed to eliminate the need for any direct cabling from your Steering Wheel buttons to your peripherals.

The Club Spec 4S uses short range radio frequencies (RF) to ensure that a clear, uninterrupted signal is passed from your Steering Wheel Buttons to the Receiver Module irrespective of mounting position.

Unlike Infra Red, the system requires no line of sight, so it can be placed under the dashboard and out of sight. The Club Spec 4S features a black, professionally finished - incredibly light and strong FR4 PCB Button Panel Assembly with 4 coloured buttons pre-installed.

The X-Monitor SP1 large Digit timer is integrated right into the button plate with a separate dedicated button, and a selectable 12 volt 4 Channel Receiver Module thats capable of switching the 10 amp relays into three different states. You can select ALL momentary, ALL latching or 2 Momentary and 2 Latching.

find out more

299.99 (329.99)

spacer

Black RX7 shell SOLD

Online Catalogue | Used parts cars and bikes | Used Mazda parts & cars | Used Mazda RX7 3rd Gen parts | Used Mazda RX7 3rd gen cars |  Black RX7 shell SOLD

Rolling Chassis

Rolling Chassis

OUT OF STOCK


Price: 1,250.00 (1,375.00)

The car will be sold as a rolling chassis, ie no bonnet, rear rumper, front bumper, or wings. There is also no engine.
What it does have is Tein suspension, apexi anti-roll bars front and back, roll cage, and the hydrolic lambo style doors that work but need adjusting and finishing, these will work off a key fob, the hydrolic system in the car is such that it will handle boot, bonnet and even jacks under the car. HKS single plate clutch, and custom fuel tank which holds approx 120 ltrs. It also comes with a custom made stainless steel exhust system which has 4 tail pipes as it exits from either side of tank. HKS Front mount Inter cooler. WGT uprated radiator. Short shifter gear lever.

Rolling chassis

Rolling chassis

This will make someone a unique car that probably no one in the world has completed before.

Car above

The pictures above are what the car looked like 75% of the way through the project. There is no reason why this could not be finished to this standard again. Below pictures are what you will be taking on.

Cage

Cage

The car has a substantial cage, installed by DS Engineering. It is not FIA approved as they are not registered with them. Cage is through the dash, has cross bars at doors and is very tight to roof for max height.
enlarge

Small dent

Small dent

Unfortunately the car was not looked after during its time in garages and came back with this small dent in rear quarter.
enlarge

Engine bay

Engine bay

Engine needs to be supplied and installed, you can see the Apexi uprated anti-roll bars.
enlarge

Hydraulic pump

Hydraulic pump

The hudraulic pump is more than man enough to open the doors even in a crash, they would be powerful enough to open if car on roof or even side. Pump was also big enough to operate boot, bonnet and jacks under car if wanted.
enlarge

Hydraulic doors

Hydraulic doors

The doors are a piece of art, it took many attempts before the doors worked and operated from behind stock wings. All other cars I've ever seen have been made behind wide body kits. Rams and doors work, but need adjustment and a solenoid switch set up to hold closed, and either a remote system from key fob or solenoids need to be added.
enlarge

Interior

Interior

Interior is empty, sound deadening is still on as this was to be a quick but comfortable show car.
enlarge

Oil Cooler

Oil Cooler

The twin oil coolers were uprated and cost of £1200.00 with braided hoses.
enlarge

Oil Cooler 2

Oil Cooler 2

Oil cooler 2 apparently got damaged while putting on trailer to come back to me, looking at it, it could be welded back on bracket successfully.
enlarge

Rads

Rads

Although not in this shot, I have a WGT uprated rad and a HKS front mount intercooler for here.
enlarge

Rear

Rear

Bumper and lights are required. The twin exhaust system can be seen, custom made by Hayward & Scott at a cost £2400.00 with the 2 rear tail pipes, no other RX7 has ever had this done as far as I'm aware. Crossed over under car to make the exhausts pulse correctly and with 2 back boxes, makes this a great sounding but quiet enough for track days with there ever increasing noise restrictions.
enlarge

Custom fuel tank

Custom fuel tank

To have the twin exhaust system meant having a custom fuel tank made. Fuel tank was fabricated by Brise Engineering in Dartford. Tyre well was cut out so as to have a flush fitting tank. We have filled with 90ltrs and believe its capable of holding 120ltrs approx, which is great for touring, or endurance racing, even track days you need to fill your RX7 twice. Tank alos has 2 fuel line outlets. 1 is already fitted with braided lines and Bosch 044 pump.
enlarge

Online Catalogue | Used parts cars and bikes | Used Mazda parts & cars | Used Mazda RX7 3rd Gen parts | Used Mazda RX7 3rd gen cars |  Black RX7 shell SOLD

spacer
spacer