Carbonetic Single pro carbon clutch Mazda RX7 FD3S. Complete inc lightened flywheel.
Choice of 2 clamping force plates 1300kg or 1600kg
Flywheel Weight 4.5KG
Complete 9.1 KG
Approx 500 bhp rating
There is a massive 5.25 kg weight saving between an Exedy single clutch and this Carbonetics clutch.
Please allow 800 miles for bedding in.
find out more

Carbonetic Blade for Mazda RX7 FD3S

£332.74

Carbonetic BLADE has been developed to provide an uprated clutch, with a stock feel at an OEM price. Clutches dont get any better than this. Specifically designed to fit in to your already fitted stock cover of your Mazda RX7 FD3S.
Approx 400 bhp rating. Blade disc 1.45KG
find out more

Carbonetic S-Spec front pad for RX7 FD

£122.96

Carbonetic S-Spec front pad for RX7 FD3S
CARBONETIC SUPER STREET pad is designed to improve overall braking performance of any street vehicles. SUPER STREET pad is developed for street and light track use where initial stopping power and resistance to fade is of prime importance. In addition to reducing brake dust and squeal, these long-lasting pads help keep rotor wear to minimum.

Applicable Rotor Temp
0-500 degrees C
Friction Coefficient
0.32-0.42
find out more

Magnecor 8mm leads for mazda RX7 FD 8bit UK

£46.99

Magnecor 8mm leads for mazda RX7 FD 8bit UK
Original equipment replacement.Designed to improve original ignition system performance on road vehicles using either electronic engine management systems or carburetors.Ideal for LPG gas conversion engines.Excellent RFI and EMI suppression.Flexible high-strength all silicone construction.
These are almost identical in length to the 16bit but have a straight cap where it connects to the coils.
Lead lengths approx, centre of cap to centre of cap each end.
T1 = 22cm, T2 = 28cm
L1 = 28cm, L2 = 33cm
find out more

RotaryArt full block kit

£178.06

RotaryArt full block kit: comprising of coolant seals, 4 inner and 4 outer square, dowell O rings 4 total , front cover O ring 1 total, oil filter base O rings 2 total, 20 total thrubolt O rings, rear stationary gear O ring 1 total and the oil control O rings 4 inner green and 4 outer black.

find out more

East Caost Parts 13b 2mm ALS Apex seals

£362.02

East Caost Parts 13b 2mm ALS Apex seals. Designed to be unbreakable so no engine damage if it lets go under pressure and designed to compliment there lightweight billet rotors.
find out more

5ltr Dexelia Ultra 5w30

£41.03

Dexelia oils are the only oil recognised by Mazda for the use in there RX8. Any other oil could void the manufacturers warentee.
find out more

1ltr Dexelia Ultra 5w30

£9.20

Dexelia oils are the only oil recognised by Mazda for the use in there RX8. Any other oil could void the manufacturers warentee.
find out more

Mazda RX8 ignition coil

£64.63

Genuine Mazda RX8 ignition coil. These are a known problem for their short life span, and some customers now treat these as a consumable, checking them at every service. Priced each, all four should be checked.
We are now able to offer these at almost half the Mazda recommended retail price and on average you will save approx £170 on a set.
find out more

Visit our new forum www.rotarycommunity.com

East Coast Parts fueling accesories

Online Catalogue | Engine & performance | Fuels & lubricants | East Coast Parts fueling accesories

East Coast Parts 8 Injector Throttle body

Price: £513.50 (£603.36 Including VAT at 17.5%)

This billet Throttle body is CNC machined from T-6 aluminum in house. This item is built to fit 8 injectors with Ford model injector plugs and has the holley #4150 bolt pattern. This piece has everything that a throttle body should have for example, machined venturis for better flow, roller barring, thick brass butterflies with a diameter of 1.875 that flows 1244 CFM and has been raise 2 inches above the base for more torque, ports for injectors, fuel rail, and will fit the Ford TPS. At this time this is the highest flowing 4150 bolt pattern throttle body in the market. This piece will fit the jay tech and the Racing Beat intake. This is the answer for all rotary vehicles and hot rods.

enlarge picture

enlarge picture

enlarge picture

East Coast Parts Throttle body with no injectors

This is the new 4150, 1244cfm throttle body. This throttle body brings the same options as the previous one but with out injector. This throttle body has been proven to out perform all the other 4150 throttle body out in the market today.

Throttle body HAT

Price: £163.80 (£192.47 Including VAT at 17.5%)

Throttle body HAT.

Lower intake manifold for East Coast TB

Price: £260.00 (£305.50 Including VAT at 17.5%)

Made to fit under the bonnet of a stock FD, plenty of meat around the ports for you to port further to your perfect/matching set-up, for use with East Coast throttle body.

Lower intake manifold, made exclusively for RotaryArt to fit under the bonnet of the RX7 FD. Pleanty of meat around ports for those that want port further.

enlarge picture

Mechanical fuel pump

Price: £360.29 (£423.34 Including VAT at 17.5%)

enlarge picture

East Coast Parts oil sandwich plate

Price: £116.63 (£137.04 Including VAT at 17.5%)

East Coast Parts oil filter plate

East Coast Parts injector bongs

Price: £53.49 (£62.85 Including VAT at 17.5%)

East Coast Parts injector bongs

Online Catalogue | Engine & performance | Fuels & lubricants | East Coast Parts fueling accesories

Visit our new forum www.rotarycommunity.com