Carbonetic Single pro carbon clutch Mazda RX7 FD3S. Complete inc lightened flywheel.
Choice of 2 clamping force plates 1300kg or 1600kg
Flywheel Weight 4.5KG
Complete 9.1 KG
Approx 500 bhp rating
There is a massive 5.25 kg weight saving between an Exedy single clutch and this Carbonetics clutch.
Please allow 800 miles for bedding in.
find out more

Carbonetic Blade for Mazda RX7 FD3S

£332.74

Carbonetic BLADE has been developed to provide an uprated clutch, with a stock feel at an OEM price. Clutches dont get any better than this. Specifically designed to fit in to your already fitted stock cover of your Mazda RX7 FD3S.
Approx 400 bhp rating. Blade disc 1.45KG
find out more

Carbonetic S-Spec front pad for RX7 FD

£122.96

Carbonetic S-Spec front pad for RX7 FD3S
CARBONETIC SUPER STREET pad is designed to improve overall braking performance of any street vehicles. SUPER STREET pad is developed for street and light track use where initial stopping power and resistance to fade is of prime importance. In addition to reducing brake dust and squeal, these long-lasting pads help keep rotor wear to minimum.

Applicable Rotor Temp
0-500 degrees C
Friction Coefficient
0.32-0.42
find out more

Magnecor 8mm leads for mazda RX7 FD 8bit UK

£46.99

Magnecor 8mm leads for mazda RX7 FD 8bit UK
Original equipment replacement.Designed to improve original ignition system performance on road vehicles using either electronic engine management systems or carburetors.Ideal for LPG gas conversion engines.Excellent RFI and EMI suppression.Flexible high-strength all silicone construction.
These are almost identical in length to the 16bit but have a straight cap where it connects to the coils.
Lead lengths approx, centre of cap to centre of cap each end.
T1 = 22cm, T2 = 28cm
L1 = 28cm, L2 = 33cm
find out more

RotaryArt full block kit

£178.06

RotaryArt full block kit: comprising of coolant seals, 4 inner and 4 outer square, dowell O rings 4 total , front cover O ring 1 total, oil filter base O rings 2 total, 20 total thrubolt O rings, rear stationary gear O ring 1 total and the oil control O rings 4 inner green and 4 outer black.

find out more

East Caost Parts 13b 2mm ALS Apex seals

£362.02

East Caost Parts 13b 2mm ALS Apex seals. Designed to be unbreakable so no engine damage if it lets go under pressure and designed to compliment there lightweight billet rotors.
find out more

5ltr Dexelia Ultra 5w30

£41.03

Dexelia oils are the only oil recognised by Mazda for the use in there RX8. Any other oil could void the manufacturers warentee.
find out more

1ltr Dexelia Ultra 5w30

£9.20

Dexelia oils are the only oil recognised by Mazda for the use in there RX8. Any other oil could void the manufacturers warentee.
find out more

Mazda RX8 ignition coil

£64.63

Genuine Mazda RX8 ignition coil. These are a known problem for their short life span, and some customers now treat these as a consumable, checking them at every service. Priced each, all four should be checked.
We are now able to offer these at almost half the Mazda recommended retail price and on average you will save approx £170 on a set.
find out more

Visit our new forum www.rotarycommunity.com

K and N Oil filters

Online Catalogue | Engine & performance | Fuels & lubricants | K and N Oil filters

K&N oil filters have nuts

We have all been there: Whether it’s remembering where that disappearing canister tool is; or having oil leak all over your garage and yourself; or finally giving up and pounding a screwdriver through the filter just to get if off. Each of our automotive and marine oil filters comes with a 1 nut welded to the top of the canister so they can be easily wrenched-off with a standard tool. Our motorcycle and ATV oil filters come with a 17 mm nut.

K&N filters construction

To satisfy the demands of racers, our oil filter has many features over and above the requirements of most vehicles. We use thicker canister walls for extra strength and durability which reduces the risk of damage from loose rocks and debris. The heavy-duty construction will withstand higher oil pressures found only in racing environments without bursting. The drilled hole on the nut is for a safety wire attachment. Required for many types of racing, the safety wire prevents blown oil filters from falling on the track and representing a hazard to other race vehicles. This extra engineering offers peace of mind for consumers who want only the best.

K&N filter points

Drilled safety wire holes for racing
Sturdy 1" wrench nut makes oil filter removal quick and easy.
Heavy-duty construction.
Resin-impregnated filter media provides maximum filtering surface for contaminant removal.
Anti-drainback valve (where applicable) eliminates dry starts, prevents oil from draining back into crankcase during engine shutdown.
Internally lubricated gasket provides positive seal while allowing easy on and off of filter.
Rolled threads provide extra protection against stripping.

K&N oil filter RX7

Price: £9.22 (£10.83 Including VAT at 17.5%)

K&N oil filter for 1st and 2nd gen RX7

K&N oil filter RX7 & RX8

Price: £9.22 (£10.83 Including VAT at 17.5%)

K&N oil filter for 3rd gen RX7 & RX8

Online Catalogue | Engine & performance | Fuels & lubricants | K and N Oil filters

Visit our new forum www.rotarycommunity.com