Online Catalogue

View Basket | Checkout | Items:, Value:

spacer
spacer

New Products

Windscreen clips

Windscreen clips

Genuine Mazda RX7 FB windscreen clips.
These are used to secure the metal trims around screen.

find out more

3.19 (3.51)

Club Spec 4S steering wheel auxiliary system

Club Spec 4S steering wheel auxiliary system

Aimed at the Club and Professional Motorsport Racer, and everyday car user, a system designed to eliminate the need for any direct cabling from your Steering Wheel buttons to your peripherals.

The Club Spec 4S uses short range radio frequencies (RF) to ensure that a clear, uninterrupted signal is passed from your Steering Wheel Buttons to the Receiver Module irrespective of mounting position.

Unlike Infra Red, the system requires no line of sight, so it can be placed under the dashboard and out of sight. The Club Spec 4S features a black, professionally finished - incredibly light and strong FR4 PCB Button Panel Assembly with 4 coloured buttons pre-installed.

The X-Monitor SP1 large Digit timer is integrated right into the button plate with a separate dedicated button, and a selectable 12 volt 4 Channel Receiver Module thats capable of switching the 10 amp relays into three different states. You can select ALL momentary, ALL latching or 2 Momentary and 2 Latching.

find out more

299.99 (329.99)

spacer

Magnecor ignition leads for Mazda RX7 FB

Online Catalogue | Engine & performance | Electronics | Magnecor |  Magnecor ignition leads for Mazda RX7 FB

10 year guarantee

Magnecor leads are covered by a 10 year guarantee which ensures long lasting reliability and
service life.

Connections

Stainless steel snap-lock terminals are used for spark plug ends and phosphor-bronze, brass or stainless steel terminals for distributor/coil ends. Leads are individually numbered.

Magnecor KV85 leads for Mazda RX7 FB 12a UK

Magnecor KV85 leads for Mazda RX7 FB 12a UK


Price: 67.49 (74.24) (80.99 (89.09) Including VAT at 20%)

Magnecor KV85 leads for Mazda RX7 FB 12a UK.
Primarily designed for racing engines using racing ignitions,turbocharging and supercharging.Entire jacket made from aerospace extreme heat-resistant silicone rubber.Exclusive Magnecor 2.5mm Metallic Inductance Suppressed Conductor will suppress EMI indefinitely,allowing this cable to be used on road vehicles with any ignition and LPG gas conversions.Can be fitted into most original lead holders.
Lead lengths approx, centre of cap to centre of cap each end.
T1 = 53cm, T2 = 54cm
L1 = 50cm, L2 = 53cm
Coil leads 46cm & 53cm
spec sheet and fitting instructions

Magnecor 7mm leads for Mazda RX7 FB 12a import

Magnecor 7mm leads for Mazda RX7 FB 12a import


Price: 71.73 (78.90) (86.08 (94.69) Including VAT at 20%)

Magnecor 7mm leads for Mazda RX7 FB 12a import
Direct replacement for 7mm original equipment carbon conductor leads with excellent RFI and EMI suppression. Overcomes problems associated with limited-life carbon conductors and poorly suppressed aftermarket spiral conductor leads on modern engines. Extra strong EVA outer jacket for better terminal retention, EPDM insulation.
Lead lengths approx, centre of cap to centre of cap each end.
T1 = 52cm, T2 = 53cm
L1 = 53cm, L2 = 54cm
Coil leads 60cm & 62cm
spec sheet and fitting instructions

Magnecor 8mm leads for Mazda Rx7 Fb 12a import

Magnecor 8mm leads for Mazda Rx7 Fb 12a import


Price: 73.18 (80.50) (87.82 (96.60) Including VAT at 20%)

Magnecor 8mm leads for Mazda Rx7 Fb 12a import
Original equipment replacement.Designed to improve original ignition system performance on road vehicles using either electronic engine management systems or carburetors.Ideal for LPG gas conversion engines.Excellent RFI and EMI suppression.Flexible high-strength all silicone construction.
Lead lengths approx, centre of cap to centre of cap each end.
T1 = 49cm, T2 = 51cm
L1 = 51cm, L2 = 51cm
Coil leads 59cm & 61cm
spec sheet and fitting instructions

Magnecor KV85 leads for Mazda RX7 FB 12a import

Magnecor KV85 leads for Mazda RX7 FB 12a import


Price: 88.01 (96.81) (105.61 (116.17) Including VAT at 20%)

Magnecor KV85 leads for Mazda RX7 FB 12a import
Primarily designed for racing engines using racing ignitions,turbocharging and supercharging.Entire jacket made from aerospace extreme heat-resistant silicone rubber.Exclusive Magnecor 2.5mm Metallic
Inductance Suppressed Conductor will suppress EMI indefinitely,allowing this
cable to be used on road vehicles with any ignition and LPG gas conversions.Can be fitted into most original lead holders.
Lead lengths approx, centre of cap to centre of cap each end.
T1 = 52cm, T2 = 54cm
L1 = 54cm, L2 = 54cm
Coil leads 62cm & 63cm
spec sheet and fitting instructions

Online Catalogue | Engine & performance | Electronics | Magnecor |  Magnecor ignition leads for Mazda RX7 FB

spacer
spacer