Online Catalogue

View Basket | Checkout | Items:, Value:

spacer
spacer

New Products

Windscreen clips

Windscreen clips

Genuine Mazda RX7 FB windscreen clips.
These are used to secure the metal trims around screen.

find out more

3.19 (3.51)

Club Spec 4S steering wheel auxiliary system

Club Spec 4S steering wheel auxiliary system

Aimed at the Club and Professional Motorsport Racer, and everyday car user, a system designed to eliminate the need for any direct cabling from your Steering Wheel buttons to your peripherals.

The Club Spec 4S uses short range radio frequencies (RF) to ensure that a clear, uninterrupted signal is passed from your Steering Wheel Buttons to the Receiver Module irrespective of mounting position.

Unlike Infra Red, the system requires no line of sight, so it can be placed under the dashboard and out of sight. The Club Spec 4S features a black, professionally finished - incredibly light and strong FR4 PCB Button Panel Assembly with 4 coloured buttons pre-installed.

The X-Monitor SP1 large Digit timer is integrated right into the button plate with a separate dedicated button, and a selectable 12 volt 4 Channel Receiver Module thats capable of switching the 10 amp relays into three different states. You can select ALL momentary, ALL latching or 2 Momentary and 2 Latching.

find out more

299.99 (329.99)

spacer

Performance Tested Seals

Online Catalogue | Engine & performance | Engine |  Performance Tested Seals

Set of 6, 2 piece apex seals 13b, 20b

Set of 6, 2 piece apex seals 13b, 20b

OUT OF STOCK


Price: 562.67 (618.94) (675.20 (742.72) Including VAT at 20%)


Performance tested seals have designed two piece apex seals in 2mm and 3mm to take one or two support springs for 13b and 20b rotary engines. These seals are designed to withstand high RPM, high boost and Nitrous Oxide. RX8 rotors just need deepening to take the 13b seals. All seals 2mm & 3mm are equally priced.

Please note, these do NOT fit the RX8 13b Renesis engine/rotors.

Set of 9, 2 piece apex seals 13b, 20b

Set of 9, 2 piece apex seals 13b, 20b

OUT OF STOCK


Price: 836.65 (920.32) (1,003.98 (1,104.38) Including VAT at 20%)


Performance tested seals have designed two piece apex seals in 2mm and 3mm to take one or two support springs for 13b and 20b rotary engines. These seals are designed to withstand high RPM, high boost and Nitrous Oxide. RX8 rotors just need deepening to take the 13b seals. All seals 2mm & 3mm are equally priced.

Please note, these do NOT fit the RX8 13b Renesis engine/rotors.

Set of 6, 2 piece 3mm apex seals 12a

Set of 6, 2 piece 3mm apex seals 12a


Price: 562.97 (619.27) (675.56 (743.12) Including VAT at 20%)

Performance tested seals have designed two piece apex seals in 3mm to take one or two support springs for 12a rotary engines. These seals are designed to withstand high RPM, high boost and Nitrous Oxide.

Performance Tested Seals require an oil additive to be added to the fuel to lubricate the apex seals.

It is recommended that you use a minimum of 1% of oil additive to suit fuel being used. ie. methanol use castor based oil

PTS highly recommends that you do not run your engine lean, as this also reduces lubricant to the seals. PTS seals better than any other seal in the market place therefore create more horse power and more combustion temperature. You will be required to use more fuel to achieve a better burn and quench combustion temperatures. Do not forget, more fuel, more horsepower.
RotaryArt full block gasket kits

RotaryArt full block gasket kits

While your putting your performance parts back in your block you will need a quality gasket kit to hold it atogether.
Full block gasket kit

Online Catalogue | Engine & performance | Engine |  Performance Tested Seals

spacer
spacer