Online Catalogue

View Basket | Checkout | Items:, Value:

spacer
spacer

New Products

Windscreen clips

Windscreen clips

Genuine Mazda RX7 FB windscreen clips.
These are used to secure the metal trims around screen.

find out more

3.19 (3.51)

Club Spec 4S steering wheel auxiliary system

Club Spec 4S steering wheel auxiliary system

Aimed at the Club and Professional Motorsport Racer, and everyday car user, a system designed to eliminate the need for any direct cabling from your Steering Wheel buttons to your peripherals.

The Club Spec 4S uses short range radio frequencies (RF) to ensure that a clear, uninterrupted signal is passed from your Steering Wheel Buttons to the Receiver Module irrespective of mounting position.

Unlike Infra Red, the system requires no line of sight, so it can be placed under the dashboard and out of sight. The Club Spec 4S features a black, professionally finished - incredibly light and strong FR4 PCB Button Panel Assembly with 4 coloured buttons pre-installed.

The X-Monitor SP1 large Digit timer is integrated right into the button plate with a separate dedicated button, and a selectable 12 volt 4 Channel Receiver Module thats capable of switching the 10 amp relays into three different states. You can select ALL momentary, ALL latching or 2 Momentary and 2 Latching.

find out more

299.99 (329.99)

spacer

Racing Beat suspension Mazda RX8

Online Catalogue | Handling | Suspension & brakes | Racing Beat suspension |  Racing Beat suspension Mazda RX8

Racing Beat spring set Mazda RX8

Racing Beat spring set Mazda RX8


Price: 235.21 (258.73) (282.25 (310.48) Including VAT at 20%)

RX-8 Coil Springs
Complete Set of Four

Racing Beat designed coil springs are suitable for street or racing applications. Designed to offer a modest reduction in ride height, these linear rate springs interchange exactly with the stock springs.

These RX-8 springs will provide a front and rear drop of approximately .5-inch drop both front and rear. A modest spring rate increase of approximately 20% will provide a performance improvement without sacrificing ride quality.

Jim Mederer, Racing Beat’s cofounder and chief engineer, shares his thoughts on designing Racing Beat’s suspension springs:

“Springs are very much a matter of opinion, I adjust ride height and spring rate based more than any other thing, my taste. We won't excessively lower a car to obtain a "look". First, the car will hit the bump rubbers far too often and that makes the car unpredictable in its handling, also it makes it harsh and it is very hard on suspension components causing them to potentially fail. We therefore make relatively small changes in ride height, usually less than 1", depending on the application. We adjust that based in part on what we perceive the best way of adjusting for good handling.

Racing Beat front spring Mazda RX8

Racing Beat front spring Mazda RX8


Price: 74.15 (81.57) (88.98 (97.88) Including VAT at 20%)

RX-8 Front Coil Springs

Racing Beat designed coil springs are suitable for street or racing applications. Designed to offer a modest reduction in ride height, these linear rate springs interchange exactly with the stock springs.

These RX-8 springs will provide a front and rear drop of approximately .5-inch drop both front and rear. A modest spring rate increase of approximately 20% will provide a performance improvement without sacrificing ride quality.

Part number and price listed are for one (1) spring.

Racing Beat rear spring Mazda RX8

Racing Beat rear spring Mazda RX8


Price: 74.15 (81.57) (88.98 (97.88) Including VAT at 20%)

RX-8 Rear Coil Springs

Racing Beat designed coil springs are suitable for street or racing applications. Designed to offer a modest reduction in ride height, these linear rate springs interchange exactly with the stock springs.

These RX-8 springs will provide a front and rear drop of approximately .5-inch drop both front and rear. A modest spring rate increase of approximately 20% will provide a performance improvement without sacrificing ride quality.

Part number and price listed are for one (1) spring.

Racing Beat RX8 front sway bar

Racing Beat RX8 front sway bar


Price: 179.40 (197.34) (215.28 (236.81) Including VAT at 20%)

Racing Beat's Front Sway Bar - 2004-2009 RX-8

Racing Beat-designed sway bars reduce chassis roll during cornering and increases your car’s sensitivity to steering inputs, thereby improving maximum cornering power. Substantial engineering effort, select steel alloys, and precise manufacturing processes are combined to produce top performance components. All Racing Beat sway bars are finished with a distinctive, red powder coating that provides a smooth, glossy protective layer. You can be assured of many years of superior handling performance with these proven bars!

RX-8 Application
The diameter of the RB front tubular bar is 1.25" (32mm) x .1875" wall thickness, as compared to the stock 1.05" (27mm) x .134" wall thickness front bar. An additional feature of the front bar is a pair of OEM style "stoppers" to prevent the bar from sliding sideways in the bar bushings during heavy cornering effort. Each bar is supplied with replacement urethane bushings, bar clamps, Prothane grease and installation instructions.

Racing Beat RX8 rear sway bar

Racing Beat RX8 rear sway bar


Price: 179.40 (197.34) (215.28 (236.81) Including VAT at 20%)

Racing Beat's Rear Sway Bar - 2004-2009 RX-8

Racing Beat-designed sway bars reduce chassis roll during cornering and increases your car’s sensitivity to steering inputs, thereby improving maximum cornering power. Substantial engineering effort, select steel alloys, and precise manufacturing processes are combined to produce top performance components. All Racing Beat sway bars are finished with a distinctive, red powder coating that provides a smooth, glossy protective layer. You can be assured of many years of superior handling performance with these proven bars!

RX-8 Application
The diameter of the rear tubular bar is .75" (19mm) x .125" wall thickness, as compared to the stock .632" (16mm) x .097" wall thickness rear bar. An additional feature of the rear bar is a pair of OEM style "stoppers" to prevent the bar from sliding sideways in the bar bushings during heavy cornering effort. Each bar is supplied with replacement urethane bushings, Prothane grease and installation instructions. (The original OEM bar clamps are retained for use with this bar.)

Racing Beat RX8 sway bar front links

Racing Beat RX8 sway bar front links


Price: 51.83 (57.01) (62.20 (68.42) Including VAT at 20%)

RX-8 Front Sway Bar Endlinks (1 Pair)

The addition of a larger aftermarket sway bar can increase the stress loads on the original OEM sway bar endlinks. To combat these increased loads, Racing Beat has designed a set of OEM style aftermarket endlinks to absorb the increased demands of a larger front sway bar.

Incorporated into the design of these links are larger 12mm mounting studs and matching retaining nuts. The sealed bearing is self lubricating and should offer many miles of maintenance free driving. Each set is sold as a front pair.

These endlinks are intended for street and autocross applications and are highly recommended for use with the Racing Beat bar. Although these upgraded endlinks can be used with the stock sway bar, we believe that the original links are adequately suited for use with the stock bar.

Due to the larger diameter studs provided on the Racing Beat endlinks, both the sway bar ends and the mounting holes on the chassis must be enlarged to accept the mounting studs. Provided in the endlink kit is the appropriate sized drill bit and a drilling guide to accomplish this task. Also included are detailed instructions complete with drilling suggestions and torque specifications.

Note: The reason that the RB sway bar is provided with a 10mm hole is to allow use of the stock OEM endlinks. If we supplied the RB Sway Bar with a larger 12mm hole, then it would become mandatory to use the aftermarket links. Although the use of the RB Endlink Kit requires minor modifications, the rather cheap “insurance” offered by the installation of this kit is well worth the modest installation effort.

Online Catalogue | Handling | Suspension & brakes | Racing Beat suspension |  Racing Beat suspension Mazda RX8

spacer
spacer