New Products

Waterless Coolant for Performance Cars

A waterless engine coolant specially formulated for performance vehicles. Race Cool 180º protects engine cooling systems from -40ºC to 180ºC. The unique properties prevent many of the problems associated with waterbased coolants such as Premature Detonation and Overheating.

Benefits

No Water - No Overheating
Race Cool 180 has a boiling point of 180°C and will not boilover.

No Water - No Corrosion
Water contains oxygen, oxygen allows corrosion. Race Cool 180 eliminates corrosion.

No Water - No Pressure
Race Cool 180 allows your cooling system to run at a lower pressure, reducing the strain on engine components.

No Water - No Liner Pitting
Race Cool 180 generates significantly less pitting when compared with all water based coolants.

No Water - More BHP
Race Cool 180 eliminates premature detonation associated with overheating.

Visit our forum www.rotarycommunity.com

RotaryArt heated front screens

RotaryArt RX8 Heated front windscreen

Price: £180.00 (£216.00 Including VAT at 20%)

RotaryArt Heated front windscreens for the RX8. Cheaper than a stock replacement by Autoglass or Mazda but with the added benefit of having a quick clear electrically heated screen.
Also ideal replacement for those racing as you can ditch the heater system and save additional wieght.
The RX 8 screens come with a new molding on them along with the mirror mount.

Available for Left or Right hand drive Mazda RX8's

Universal heater switch kit

Price: £33.00 (£39.60 Including VAT at 20%)

Universal windscreen heater switch kit, ideal for the RX7 or RX8. Small discrete steel button to active the relay timer. Kit complete with Maxi fuse holder, Maxi fuse holder bracket and Maxi 30amp fuse.

Front screen mould

Price: £63.26 (£75.91 Including VAT at 20%)

Genuine Mazda RX8 front screen moulding, goes up sides and over top of glass.

The screens now come with aircraft ( Raychem) wires . They are only 1mm as they are a high grade and can take 3 times as much current as a copper wire . You must make this clear to people fitting them as if they only use a 1mm copper wire it will not take the load . 2.5 mm in copper is the recommended grade , if of course they use Raychem its fine to use 1mm

Installation
Most customers can have these screens and installationat at no cost via their insurance company.

Installation costs
We install an independent supply , fused and with the option of relays1 or 2 so the screen is automatically switched off after 10-15 mins. 1 or 2 switches depending if you want duel heater eliment to work as 1 or independent sides.

Installation at RoTechniks