Carbonetic Single pro carbon clutch Mazda RX7 FD3S. Complete inc lightened flywheel.
Choice of 2 clamping force plates 1300kg or 1600kg
Flywheel Weight 4.5KG
Complete 9.1 KG
Approx 500 bhp rating
There is a massive 5.25 kg weight saving between an Exedy single clutch and this Carbonetics clutch.
Please allow 800 miles for bedding in.
find out more

Carbonetic Blade for Mazda RX7 FD3S

£332.74

Carbonetic BLADE has been developed to provide an uprated clutch, with a stock feel at an OEM price. Clutches dont get any better than this. Specifically designed to fit in to your already fitted stock cover of your Mazda RX7 FD3S.
Approx 400 bhp rating. Blade disc 1.45KG
find out more

Carbonetic S-Spec front pad for RX7 FD

£122.96

Carbonetic S-Spec front pad for RX7 FD3S
CARBONETIC SUPER STREET pad is designed to improve overall braking performance of any street vehicles. SUPER STREET pad is developed for street and light track use where initial stopping power and resistance to fade is of prime importance. In addition to reducing brake dust and squeal, these long-lasting pads help keep rotor wear to minimum.

Applicable Rotor Temp
0-500 degrees C
Friction Coefficient
0.32-0.42
find out more

Magnecor 8mm leads for mazda RX7 FD 8bit UK

£46.99

Magnecor 8mm leads for mazda RX7 FD 8bit UK
Original equipment replacement.Designed to improve original ignition system performance on road vehicles using either electronic engine management systems or carburetors.Ideal for LPG gas conversion engines.Excellent RFI and EMI suppression.Flexible high-strength all silicone construction.
These are almost identical in length to the 16bit but have a straight cap where it connects to the coils.
Lead lengths approx, centre of cap to centre of cap each end.
T1 = 22cm, T2 = 28cm
L1 = 28cm, L2 = 33cm
find out more

RotaryArt full block kit

£178.06

RotaryArt full block kit: comprising of coolant seals, 4 inner and 4 outer square, dowell O rings 4 total , front cover O ring 1 total, oil filter base O rings 2 total, 20 total thrubolt O rings, rear stationary gear O ring 1 total and the oil control O rings 4 inner green and 4 outer black.

find out more

East Caost Parts 13b 2mm ALS Apex seals

£362.02

East Caost Parts 13b 2mm ALS Apex seals. Designed to be unbreakable so no engine damage if it lets go under pressure and designed to compliment there lightweight billet rotors.
find out more

5ltr Dexelia Ultra 5w30

£41.03

Dexelia oils are the only oil recognised by Mazda for the use in there RX8. Any other oil could void the manufacturers warentee.
find out more

1ltr Dexelia Ultra 5w30

£9.20

Dexelia oils are the only oil recognised by Mazda for the use in there RX8. Any other oil could void the manufacturers warentee.
find out more

Mazda RX8 ignition coil

£64.63

Genuine Mazda RX8 ignition coil. These are a known problem for their short life span, and some customers now treat these as a consumable, checking them at every service. Priced each, all four should be checked.
We are now able to offer these at almost half the Mazda recommended retail price and on average you will save approx £170 on a set.
find out more

Visit our new forum www.rotarycommunity.com

Rotaryart fuel & oil products

Online Catalogue | Engine & performance | Fuels & lubricants | Rotaryart fuel & oil products

Fuel rails tested

We have used our rails on some of the top race cars in the UK and both have exceeded expectations, so we are confident that these wil give you a new level of performance over other rail manufacturers.

Fastest drag RX7 in Europe

Chris is now officailly the fastest street legal rotary in the UK. On 26th Oct 2008 Chris smashed the UK record and powered his way to the finish line in 9.00 secs @ 151mph.

Tony's Nippon Challenge

Dispite being anywhere between 200-400bhp down on most of the grid Tony has proven the car and his drivers skills with consistant 2nd place finishes.

New fittings
We now ship these with new fittings, The 90 degree elbow now allows for more flexibility when installing and is even better value for money on our easy install fuel rails.

RotaryArt Fuel rail in silver

Price: £180.00 (£211.50 Including VAT at 17.5%)

Designed for the RX7 13b, Rotaryart's own design fuel rails have been specifically designed for quick installation, you do not have to remove the plenum to install, giving you savings on labour charges. All bolts & fixings supplied. Anodised to keep its finish. There are no O rings to leak and have fiments for easy instalation to existing OE fuel lines. Mazda use 8mm fuel lines but you can have optional extra fitments from 10mm to 14mm, please make sure your system will support larger fiments.